- Home
- Products
- Cases
- Contact Us
- Tel：13773673536
|
The production process of rubber products
2021-07-19
Rubber products generally need to be customized according to the customer's need to open the mold. The mold opening is generally based on the 2d or 3d size drawings provided by the customer for pre-mold preparation. If the customer cannot provide the drawings, we can provide physical samples. We follow the samples. Come to help you design the drawings and give you confirmation. If there is no drawing or sample, the customer can provide you the assembly parts of this product, and we will communicate with you for free drawing for your confirmation, and open the mold after confirming that it is correct.
The mold processing of rubber products is completed by the mold engineering according to the designed programming data and input into the CNC machine tool. The relatively simpler can be manually operated by the machine tool to complete the processing. Some more difficult silicone rubber products need to be discharged by a spark machine. Out of the mold. Therefore, the production technology content is relatively high, and the time is relatively longer. Generally, the delivery time of large models is calculated according to 7-12 days. Rubber products can be tinted according to customer requirements, and mixed according to the color number of the international Pantone color card specified by the customer or according to the color plate provided by the customer. The color sensitivity is extremely high, the color is accurate, and the color difference is small. All kinds of rubber products of our company are made of high-quality materials, which are environmentally friendly and non-toxic. The hardness can be adjusted according to the customer's different use environment and performance. The hardness is 20-80 degrees for silicone and 30-90 degrees for rubber. The mold and rubber material are all made, put the mold in the vulcanizer to heat, adjust the mold, wash the mold, and try the mold. Then set the molding time of the product in batches according to the actual weight and size of the product. After the rubber product is formed, the quality inspector needs to conduct a full inspection on the size, hardness, and performance of the product in the first time according to the customer's sample and order requirements. After confirming that it is correct, the formal mass production will be carried out. |
24 service hotline
13773673536
